Solar & Load
Model: S10L10


• Extreme design –40° to +50°C (-40° to +120°F)
• Temperature Compensation for charing and load voltages
• Reliable - 100% solid state
• Stainless steel case
• 5 year warranty
• Manufactured with solar power
• Designed and built in North America

Electrical Specifications
Voltage configurations 12 or 24 volts (custom voltages 6 to 60 volts)
Max. input 40 volts (12V control), 60V (24V control)
Max. Current 10 Amps DC Solar, 10 Amps DC Load
Consumption 0.6 mA, 2.5 mA when Charging or Load on, 4 mA load on & charging
Solar Regulation method Pulse Width Modulation PWM, positive side switching
Typical charging set points: Bulk:14.4 Volts, Float:13.6 Volts, Temperature Compensated (custom voltages available)
Typical load set points: On:13.0 Volts, Off:12.0 Volts, (other voltages available to 60V)
Typical load time delay: 60 Seconds at or past set point (other time delays available)

General Specifications
Temperature range: –40° to +50°C or +120°F
Case: Stainless steel case
Weight: 440 grams (15.6 oz)
Size (H x W x D): 8 x 14 x 4.5 cm (3.125 x 5.5 by 1.75 inches)
Mounting: wall mountable
Terminals: 12-24 AWG

Voltage setpoints
Time delays
Trim adjustment
Temperature Compensation Charging Off
Temperature Compensation Load Off
Charging LED (1 flash charging, 2 flashes at Bulk Voltage, 3 flashes in Float Mode)
Load LED (1 flash - low set point, 2 flashes - Off, 3 flashes - Low Voltage & Off)
Lithium Battery (no discharge below 4C)
Output ON when the voltage is low

149 USD