10 & 20 Amp Load Control / Low Voltage Disconnect 12V or 24V

Protect your batteries from over-discharge. Once the battery or input voltage is below the Off set point, a time delay starts. If the input voltage remains at or below the set point the output is turned off once the time delay has been reached. When the input voltage is at or above the On set point a time delay starts. If the voltage remains at or above the set point and the time delay is up the output will turn on.

You order the set point and time delay and they are fixed during manufacture.
There is an adjustment to increase or decrease the voltage settings on the front of the control.

Model: L10, L20

• Extreme design –40° to +50°C (-40° to +120°F)
• Reliable - 100% solid state
• Stainless steel case
• 5 year warranty
• Manufactured with solar power
• Designed and built in North America

Electrical Specifications
Voltage configurations 12 or 24 volts (custom voltages 6 to 60 volts)
Consumption 0.8 mA, 3.6 mA when Load on
Max. input 40 volts (12V control), 60V (24V control)
Max. Current 10 or 20 Amps DC
Typical set points: On:13.0 Volts, Off:12.0 Volts, (other voltages available to 60V)
Typical time Delay: 60 seconds
Front Adjustment:+0.5V -0.5V (12V control), +1.0V -1.0V (24V control)
Typical time delay: 60 Seconds at or past set point (other time delays available)

General Specifications
Temperature range: –40° to +50°C or +120°F
Case: Stainless steel case
Weight: 440 grams (15.6 oz)
Size (H x W x D): 8 x 14 x 4.5 cm (3.125 x 5.5 by 1.75 inches)
Mounting: wall mountable
Terminals: 12-24 AWG

Voltage setpoints
Time delays
Temperature Compensation
Status Light: 1 LED (1 flash - low set point, 2 flashes - Off, 3 flashes - Low & Off)
Lithium Battery (no discharge below 4C)
Output ON when the voltage is low


Installation Manual

L10 - 10 Amp $119 USD

L20-20 Amp $169 USD