Site logo


IMG_2725

Solar & Load
Model: LS10L10

Features

• On dusk to dawn (or preset number of hours)
• Extreme design –40° to +50°C (-40° to +120°F)
• Temperature Compensation
• Reliable - 100% solid state
• Fully encapsulated in epoxy potting
• 5 year warranty
• Manufactured with solar power
• Designed and built in North America

Electrical Specifications
Voltage configurations 12 or 24 volts (custom voltages 6 to 60 volts)
Max. input 40 volts (12V control), 60V (24V control)
Max. Current 10 Amps DC Solar, 10 Amps DC Load
Consumption 0.6 mA, 2.5 mA when Load on or charging
Solar Regulation method Pulse Width Modulation PWM, positive side switching
Typical charging set points: Bulk:14.4 Volts, Float:13.6 Volts, Temperature Compensated (custom voltages available)
Typical load set points: On:13.0 Volts, Off:12.0 Volts, (other voltages available to 60V)
Typical load time delay: 60 Seconds at or past set point (other time delays available)


General Specifications
Temperature range: –40° to +50°C or +120°F
Case: Stainless steel case
Weight: 440 grams (15.6 oz)
Size (H x W x D): 8 x 14 x 4.5 cm (3.125 x 5.5 by 1.75 inches)
Mounting: wall mountable
Terminals: 12-24 AWG

Options
On for set number of hours after sunset
PWM Off (to ensure no radio interference)
Time delays
Trim adjustment
Temperature Compensation Charging Off
Temperature Compensation Load Off
Charging LED (1 flash charging, 2 flashes at Bulk Voltage, 3 flashes in Float Mode)
Load LED (1 flash - low set point, 2 flashes - Off, 3 flashes - Low Voltage & Off)
Lithium Battery (no discharge below 4C)
Output ON when the voltage is low

L-S10L10
VOLTAGE